Carrier 38TXA Guide Betriebsanweisung PDF herunterladen (Seite 190)

190 Chapter 4

S:\agilent\83217\OPT001\BOOK\CHAPTERS\paramtr.fm

Parameter Descriptions

32. RXA Tolerance for Setting Audio Level (% error)

32. RXA Tolerance for Setting Audio Level (%

error)

This parameter is used as the value of the maximum percentage of

error that you are allowed for setting the MSUT volume.

The value sets the tolerance window in the analog meter screen that is

used to manually set the MSUT’s volume during testing; the meter

needle must be within the tolerance window (shown by two longer lines

on the meter) before the program will accept the manually set MSUT’s

volume. The tolerance should be as accurate as the volume control will

allow.

NOTE

This parameter is only active when parameter 31. RXA Set Audio Lvl

[0=no xx=level volts] is set to accept audio level in volts.

Example

Enter the value as a percentage of the desired audio level. For example,

if the MSUT’s maximum audio power is 10 watts, and the tolerance for

setting volume is set to 5%, the window will be 1 watt (which is

±5% of

10 watts, the tolerance allows settings above and below the point

determined by the audio level value converted from volts to watts).

1 2 ... 185 186 187 188 189 190 191 192 193 194 195 ... 213 214

Keine Kommentare

Carrier 38TXA Guide Betriebsanweisung Seite 190