
5-376-000097
REV. 1 - 12/08
Section II: Operation
Page 70
HYDRAULIC GRID OPERATION
1. Lower the grid arms open/close
control handle to unfold and open
the arms for loading.
2. Extend the lift arm under the
casualty vehicle being sure that
all under carriage parts are
cleared and that the front portion
of the grid is in contact with both
tires. Lower the grid fully to the
ground. Never get under the
casualty vehicle.
3. Visually inspect the tire to grid
contact before proceeding.
4. Lower the grid arms open/close
control handle again to fully close
the arms around the casualty
vehicle's tires. Make sure that
the arm is fully closed and in
its over-center, locked,
position.
Kommentare zu diesen Handbüchern