Carrier operating and maintanance Spezifikationen PDF herunterladen (Seite 70)

5-376-000097

REV. 1 - 12/08

Section II: Operation

Page 60

5. Adjust the electronic or manual throttle control to set the engine

speed to approximately 1000-1200 R.P.M. Refer to chassis operator’s

manual for proper operation of the auxiliary throttle. If your chassis is

equipped with the remote throttle up option from the chassismanu-

facturer there is no need to set the throttle up control in the cab

because the throttle will automatically increase when any of the

carrier hydraulic functions are operated.

CAUTION:

NEVER exceed 1400 R.P.M. When your hook up is complete,

reset engine idle to normal.

6. Block the carrier's rear tires with

wheel chocks to prevent

accidental carrier movement.

Check the area around the carrier

and the vehicle to be loaded for

obstructions or hazards.

7. Lower the Tow Option Raise/

Lower Control handle to lower the

front end of the wheel lift to about

1-1/2" from the ground. Make

sure that it will clear the

underside of the vehicle when the

wheel lift boom is extended.

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 115 116

Keine Kommentare

Carrier operating and maintanance Spezifikationen Seite 70