Carrier operating and maintanance Spezifikationen PDF herunterladen (Seite 50)

5-376-000097

REV. 1 - 12/08

Section II: Operation

Page 40

7. Raise the Rollback Control

handle to slide the deck back.

Align the arrow decal pointer on

the side of the deck with the first

control handle. Tilting the

deck too soon may cause

damage to the mechanical

hold down.

8. Raise the Tilt Control handle to

raise the front of the deck until

the rear bumper rests firmly on

the ground.

9. Remove the tie-downs from the

rear of the vehicle.

CAUTION:

NEVER walk or climb on the

deck surface.

10. Raise the Rollback Control

handle to slide the deck back.

Slide the deck back until the

approach plate makes firm

contact with the ground. Make

sure that the rear bumper and

the approach plate are both in

firm contact with the ground

before loading so there is equal

weight distribution between the

rear bumper and the end of the

deck.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 115 116

Keine Kommentare

Carrier operating and maintanance Spezifikationen Seite 50