Carrier operating and maintanance Betriebsanleitung PDF herunterladen (Seite 18)

Figure 41.

- Unit of unequal width - situation B

• Side 1 and 2: Cut the connection profiles to the

correct length and mount them on the correct sides

(see Fig 44).

• Side 3 and 4: Cut the connection profiles to the

correct length and mount them on the correct sides

(see Fig 37).

Figure 42.

- Unit of unequal width - situation C

• Side 1: Cut the connection profile to the correct

length and mount it on the correct side (see Fig

36).

• Side 2: Cut the connection profile to the correct

length and mount it on the correct side (see Fig

44).

• Side 3: Cut the connection profile to the correct

length and mount it on the correct side (see Fig

37).

• Side 4: Cut the connection profile to the correct

length and mount it on the correct side as described

below.

Figure 43.

- Roof finish, situation C, side 4

Mount Z-profiles over the projecting cross beam of

the top section as described below. The plastic roof

foil of the bottom casing section can be applied over

these profiles.

Figure 44.

- Roof finish, projecting cross beam

Figure 45.

- Unit of unequal width - situation D

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 40 41

Keine Kommentare

Carrier operating and maintanance Betriebsanleitung Seite 18