Carrier operating and maintanance Betriebsanleitung PDF herunterladen (Seite 17)

Cross section of width direction

Figure 37.

- Width direction view, unit of unequal

width

Figure 38.

- Length direction view, unit of unequal

width

Cross section of length direction

Outdoor Installation

The top section includes a projecting cross beam that

is effectively as wide as the bottom section. For an

outdoor installation the connection profiles supplied

need to be cut to the correct length. These profiles

should be mounted over the entire unit length and

width.

• Position the top section as indicated in the dimen-

sional drawing.

The position of the top section can be as described

in one of the four situations below:

Figure 39.

- Unit of unequal width - situation A

• Side 1: Cut the connection profile to the correct

length and mount it on the correct side (see Fig

36).

• Side 2: Cut the connection profile to the correct

length and mount it on the correct side as described

below.

Figure 40.

- Roof finish, situation A, side 2

• Side 3 and 4: Cut the connection profiles to the

correct length and mount them on the correct sides

(see Fig 37).

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 40 41

Keine Kommentare

Carrier operating and maintanance Betriebsanleitung Seite 17