Carrier 40KMQ Spezifikationen PDF herunterladen (Seite 7)

The condensate may be discharged at a maximum height of

in. above the unit, as long as the ascending tube is vertical

and aligned with the drainage flange.

If it is necessary to discharge the condensate from a level

above 7

in., install an auxiliary water discharge pump and

float valve. A float valve is recommended to stop the compres-

sor if there is a fault at the auxiliary pump.

The condensate pipe must be insulated with condensation

proof material such as polyurethane, propylene or neoprene of

in. to

in. thickness. See Fig. 10.

NOTE: If more than one unit is installed in the room, the drain

system can be designed as shown in Fig. 10.

Installing the Grille and Frame Assembly

— Carefully un-

pack the assembly and check for damage sustained in transport.

Attach the assembly to the unit by using the two hooks. See

Fig.11. Tighten the four screws, link the electrical connectors

and insert the wires in the cable clamp. Use the screws supplied

to fix the frame in to position. See Fig. 12.

Ensure that the frame is not distorted by excessive tighten-

ing, that it is aligned with the false ceiling and that there is a

seal between the air inlet and outlet. See Fig. 13. Gasket “A”

prevents return air from mixing with the supply air and gasket

“B” prevents the supply air from leaking into the ceiling void.

Once the unit is mounted in the ceiling, the gap between the

unit frame and the false ceiling must not be more than

in.

wide.

The drain tube extension must be securely fastened to the

condensate drain. Failure to do so could result in conden-

sate water dripping on to the floor, which could cause per-

sonal injury.

Washer

Threaded hangers

Washer

Nut

Wooden frame

Threaded hangers

Washers

Nut

Threaded hangers

"T" bar

(to be removed)

Supension Brackets

Threaded Hangers

T-Bar

Threaded Hangers

T-Bar

Fig. 4 — Positioning Unit

Fig. 5 — Attaching Hangers to Ceiling

Fig. 6 — Threaded Hangers and T Bar

Fig. 7 — Positioning Unit in Ceiling

False

Ceiling

Spirit

Level

1“ to 1-3/16”

Indoor

Outdoor

3/16"

3/8"

10 m

)

"4/

3-2

m 08/0

Fig. 8 — Align and Level the Unit

Fig. 9 — Drilling for Connections

1 2 3 4 5 6 7 8 9 10 11 12 ... 23 24

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier 40KMQ Spezifikationen Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen Carrier 40KMQ