Carrier 52S series Bedienungsanleitung PDF herunterladen (Seite 22)

Accessory Retroﬁt Kit For

Amana/Trane Sleeve

Part No.: AM-RETROFIT-KIT

This kit contains the items that allow owners to install

a 52S chassis into an Amana or Trane sleeve so that

there is no air leakage or damage to 52S unit compo-

nents. The kit includes a bracket, foam baffles, screws,

side angles, a foam seal, and foam gaskets. The retro-

ﬁt kit is an accessory and must be ordered separately

from the factory.

The installation requires adding a bracket (Figure A)

to the wall sleeve to ensure that the chassis will be

level when it is placed in the metal sleeve. Attach foam

seal to front of sleeve as shown in Figure A. Two foam

baffles (provided in the Retroﬁt Kit) are placed on the

outdoor condenser coil tube sheets, one baffle on each

tube sheet (Figure B). These baffles must be installed

to prevent air recirculation. Foam gaskets (Figure C)

added to the basepan prevent water leakage.

SLEEVE

INSTALLED

BRACKET

ATTACHED

FOAM SEAL

A. Bracket Attached to Amana/Trane Metal Sleeve

B. Foam Baffles Attached on Outdoor Coil Tube Sheets

BASEPAN

NOTCH

LOCATION (2)

GASKETS

(2 EACH SIDE)

C. Gaskets Installed onto Basepan

Refer to the installation instructions for complete in-

stallation procedures.

IMPORTANT: Be sure that the foam baffles make

a good seal between the grille and outdoor coil tube

sheets. Improper installation of the foam baffles or

neglecting to install them can result in condenser

(outdoor) air recirculation. This will degrade the

unit’s performance and shorten product life. Do not

ignore this step. Carrier does not assume responsi-

bility for costs or damages resulting from misappli-

cation of foam baffles.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 48 49

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier 52S series Bedienungsanleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Split-System-Klimaanlagen Carrier 52S series