Carrier 558D Bedienungsanleitung PDF herunterladen (Seite 10)

Dorner Mfg. Corp. 10 851-558 Rev. D

Fixed and Adjustable Height Stands

Preventive Maintenance and Adjustment

Stand Height Adjustment

Height Adjustment for Fixed and

Adjustable Height Stands

Required Tools

• 6 mm Hex Key Wrench

1. Using a support (Figure 22, item 1), raise conveyor and

stand off the floor.

Figure 22

2. Loosen button screws (Figure 22, item 2).

3. Raise or lower stand leg (Figure 22, item 3) to the

required height. Level stand from side to side using a

level (Figure 22, item 4).

4. Tighten button screws (Figure 22, item 2) to 150 in–lb

(17 N–m).

5. Repeat steps 2 through 4 on opposite stand leg.

Height Adjustment for Fixed and

Adjustable Height Stands with Fine

Adjustment Kit

Required Tools

• 6 mm Hex Key Wrench

• 13 mm Open End Wrench

WARNING

Exposed moving parts can cause severe

injury.

LOCK OUT POWER before removing guards

or performing maintenance.

WARNING

Loosening stand height or angle adjustment

screws may cause conveyor sections to drop

down, causing severe injury.

SUPPORT CONVEYOR SECTIONS PRIOR TO

LOOSENING STAND HEIGHT OR ANGLE

ADJUSTMENT SCREWS.

WARNING

Failure to secure screws (Figure 22, item 2)

may cause conveyor sections to drop down

causing severe injury.

TIGHTEN SCREWS (Figure 22, item 2) AFTER

ADJUSTMENT.

WARNING

Exposed moving parts can cause severe

injury.

LOCK OUT POWER before removing guards

or performing maintenance.

WARNING

Loosening stand height or angle adjustment

screws may cause conveyor sections to drop

down, causing severe injury.

SUPPORT CONVEYOR SECTIONS PRIOR TO

LOOSENING STAND HEIGHT OR ANGLE

ADJUSTMENT SCREWS.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier 558D Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Carrier 558D