Carrier 42VMC Installationshandbuch PDF herunterladen (Seite 8)

42VMC---N

GB - 7

ENGLISH

Drilling the hole in the wall for the

connection of the pipes

The pipes can exit the unit to three different directions (see

illustration). For exit to the rear, the wall hole must be made in the

position shown in the illustration.

Drill a 70 or 80 mm diameter hole.

The hole must have a 5-10 mm downward slope towards the

outside. Insert the plastic conduit provided.

Pass the electrical connecting wires through the conduit (see

electrical connections).

 Indoors

 Outdoors

Condensate drain pipe

For vertical installation

Connect the PVC pipe to the connection on the drain pan.

IMPORTANT:

The outdoor unit is designed to operate without the use of

condensate water to cool the condenser coil.

It is necessary to discharge the condensate directly into

the sewer system, downpipes or to disperse it outside.

Installation: 42VMC 009N - 012N - 014N - 018N - 024N

A Refrigerant connections

B Condensate drain pipe

Ø 80 mm

50 mm

75 mm

Ø 70 / 80 mm





5-10 mm



42VMC---N 009 012 014 018 024

A mm 850 850 1000 1000 1000

B mm 786 786 940 940 940

C mm 237 237 250 250 250

D mm 237 237 285 285 285

For horizontal installation

To allow the condensate drain pipe to correctly come out of the

unit, proceed as follows:

• Remove from suction grille, the part of grille fixed tonguing,

pressing it until tabs is unhooked.

Mount condensate drain pipe cover  supplied, fitting it as

necessary. In the event of condensate discharge pump is used

(accessory), the condensate drain pipe can exit together with

the refrigerant pipes.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 18 19

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier 42VMC Installationshandbuch Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Split-System-Klimaanlagen Carrier 42VMC