Carrier VECTOR 6500 Wartungshandbuch PDF herunterladen (Seite 244)

8−1

62-11389

SECTION 8

SERVICE

WARNING

Advance microprocessor equipped units

may start automatically at any time the Main

Power switch is not in the OFF position.

Also, the unit may be fitted with two way

communication equipment that will allow

starting of the unit from a remote location

even though the switch is in the OFF posi-

tion.

WARNING

Be aware of HIGH VOLTAGE supplied at the

power plug or from the generator. When

performing service or maintenance proced-

ures: ensure any two way communication is

disabled in accordance with the manufac-

turer’s instruction, ensure the Main Power

Switch is in the OFF position and, whenever

practical, disconnect the high voltage

source, lockout/tagout the receptacle and

disconnect the negative battery connec-

tion. NEVER dis-assemble the generator:

HIGH MAGNETIC FIELD INSIDE! This field

can interfere with cardiac implants such as

pacemakers and defibrillators.

WARNING

Disconnect batteries before doing any elec-

trical welding on unit or chassis to which

unit is attached (trailer, container, rail car,

metal building, etc).

CAUTION

Unit uses R404A and POE oil. The use of in-

ert gas brazing procedures is mandatory for

all Carrier Transicold refrigeration units;

otherwise compressor failure will occur.

For more information Refer to Technical

Procedure 98-50553-00 Inert Gas Brazing

8.1 SECTION LAYOUT

Service procedures are presented herein under the

following major sections:

S Scheduled Maintenance - Section 8.2

S Pretrip Inspection - Section 8.3

S External Surface Service (grille, surround, doors and

display & keypad assembly) - Section 8.4, beginning

on page 8−5

S Engine And Engine Related Systems Service- Sec-

tion 8.5, beginning on page 8−7

S Refrigerant System Service - Section 8.6, beginning

on page 8−14

S Compressor and Unloader Service - Section 8.7, be-

ginning on page 8−20

S Refrigerant System Component Service - Section

8.8, beginning on page 8−26

S Electrical System Component Service - Section 8.9,

beginning on page 8−32.

Refer to the Table Of Contents to locate specific topics.

8.2 SCHEDULED MAINTENANCE

For the most reliable operation and for maximum life,

your unit requires regular maintenance. This includes oil

and filter changes, fuel and air cleaner replacement,

coolant replacement and pretrip inspections.

Maintenance is to be performed in accordance with the

procedures provided in Table 8−1.

8.3 PRE TRIP INSPECTION

Pre trip inspection should be performed before every trip

and at regular maintenance intervals. Pre trip

procedures are provided in Table 8−2.

1 2 ... 239 240 241 242 243 244 245 246 247 248 249 ... 329 330

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier VECTOR 6500 Wartungshandbuch Seite 244

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Carrier VECTOR 6500