Carrier EACB1614 Bedienerhandbuch PDF herunterladen

Electronic Air Cleaner

Installation Instructions

EACB

0014, 0020, 1614, & 2020

NOTE: Read the entire instruction manual before starting the

installation.

TABLE OF CONTENTS

PAGE

SAFETY CONSIDERATIONS 1.........................

INTRODUCTION 1...................................

DESCRIPTION AND USAGE 1.........................

INSTALLATION 5....................................

COMMONLY ASKED QUESTIONS 7....................

MAINTENANCE OF CELLS 8..........................

TROUBLESHOOTING 8...............................

PARTS LIST 11......................................

SAFETY CONSIDERATIONS

Installation and servicing of this equipment can be hazardous due

to mechanical and electrical components. Only trained and

qualified personnel should install, repair, or service this equipment.

Untrained personnel can perform basic maintenance functions such

as cleaning and replacing air filters. All other operations must be

performed by trained service personnel. When working on this

equipment, observe precautions in the literature, on tags, and on

labels attached to or shipped with the unit and other safety

precautions that may apply. Follow all safety codes. Installation

must be in compliance with local and national building codes.

Wear safety glasses, protective clothing, and work gloves. Have

fire extinguisher available. Read these instructions thoroughly and

follow all warnings or cautions included in literature and attached

to the unit.

Recognize safety information. This is the safety-- alert symbol

When you see this symbol on the unit and in instructions or

manuals, be alert to the potential for personal injury.

Understand these signal words; DANGER, WARNING, and

CAUTION. These words are used with the safety--alert symbol.

DANGER identifies the most serious h azards which will result in

severe personal injury or death. WARNING signifies hazards

which could result in personal injury or death. CAUTION is used

to identify unsafe practices which may result in minor personal

injury or product and property damage. NOTE is used to highlight

suggestions which will result in enhanced installation, reliability , or

operation.

INTRODUCTION

These instructions cover the installation, operation and

maintenance of an EACB Electronic Air Cleaner.

This electronic air cleaner is technically known as a two-- stage

electrostatic precipitator. The air cleaner is designed to remove

airborne particulates, including dust, dirt, smoke, pollen, virus,

spores, bacteria and mold, from indoor air. Air movement through

the unit is provided by the heating, air conditioning or ventilating

system blower. As dirty air enters the air cleaner, the air passes

through a metal mesh prefilter. The prefilter prevents lint, pet hair

and other large particulates from entering the air cleaner. It is

important that these filters be in place to prevent excessive dirt

loading of the air cleaner collector cells. These filters extend the

time between maintenance of the air cleaner collector cells. This

allows the ionizing --collector cells to provide clean air for a longer

period between washings. The prefiltered air then passes through a

two--stage Electronic Air Cleaner. In the first stage, all airborne

particulate, even submicron size, are electronically charged

(positive) as they pass through the ionizer. The ionizer field is set

up by a corona discharge emanating from the fine, tightly strung

wires suspended between two adjacent flat plates. In the second

stage, the charged particulate passes through an intense electrical

field established between alternately charged and grounded parallel

collector plates. Here, the positively charged particulate is attracted

to the negatively ground plates and removed from the air stream.

DESCRIPTION AND USAGE

Unit Specifications

This air cleaner is easy to install, operate, and maintain. See Fig. 1

for EACB assembly. See Table 1 and Fig. 2 for unit specifications.

POWER TRAY ASSEMBLY

COVER

ON-OFF SWITCH

INDICATING

LIGHTS

CELL

CONTACT

FRONT PANEL

ASSEMBLY

PRE-FILTERS(S)

COLLECTING CELL(S)

CABINET

POWER TRAY

ASSEMBLY

C04006

Fig. 1 -- Unit Assembly

1 2 3 4 5 6 ... 13 14

Inhaltsverzeichnis

Seite 1 - Installation Instructions

Electronic Air CleanerInstallation InstructionsEACB0014, 0020, 1614, & 2020NOTE: Read the entire instruction manual before starting theinstallatio

Seite 2 - Power Tray Assembly

103. Locate the jumper terminal (see 12).LOWL M HMEDL M HHIL M HC02036Fig. 12 -- Jumper Terminal Adjustment4. With a pair of needle nose pliers, carfu

Seite 3 - Electronic Air Cleaner

11PARTS LIST1653148CELLCONTACT1014921117613ONOFFC04005PARTS LISTReference Number Description1 Power Tray Assembly2 High Frequency Power Supply3 ON/OFF

Seite 4 - Planning the Installation

12TROUBLESHOOTING THE DUCT MOUNT ELECTRONIC AIR CLEANERIs green light on?YesYesYesYesYesYesNoNoNoNoNoNoNoNoNoYesYesYesYesYesYesNoNoNoIs red light on?I

Seite 5 - (PLASTIC)

13 CAC / BDP Catalog 63EA-CA0 39004DP290 05-03 FOR SERVICE OR REPAIR, FOLLOW THESE STEPS IN ORDER: FIRST: Contact the installer. You may

Seite 6 - ELECTRICAL INSTALLATION

Seite 7 - COMMONLY ASKED QUESTIONS

2Table 1 – Unit SpecificationsMODEL NO. EACBA--- --- ---0014 EACBA--- --- ---0020 EACBA--- --- ---1614 EACBA--- --- ---2020 EACBB--- --- ---2020Airflo

Seite 8 - TROUBLESHOOTING

3provided at the rear of the tray allowing the option to permanentlywire the unit directly to a furnace control.AirFlow Sensor (AFS)This part contro l

Seite 9 - High Altitude Operation

4AIRCLEANEROPENINGMAX 4"/102 mm DROPPER LINEAL 12"/305mmFURNACEOPENINGAIR FLOWFURNACEAIR CLEANERAIR FLOW20TRANSITION SECTIONoA07682Fig. 5 --

Seite 10 - Checking the Power Supply

5If an atomizing humidifier must be mounted upstream of this aircleaner:1. Mount it as far upstream as possible (recommended 6’/2mminimum).2. Install

Seite 11 - PARTS LIST

6or 1/8” rivets. If the adjoining ductwork is flanged, installthe screws so that the screw heads are inside the cabinet.This will prevent damage to th

Seite 12

7To install this model with a 240v fan coil:1. Turn air cleaner OFF using ON/OFF rocker switch locatedon front panel.2. Plug power cord into acceptabl

Seite 13 - CAC / BDP

8RemoveSoakRinseDrip DryReplaceNote Air FlowDirection ArrowC02035Fig. 11 -- Typical Call and Prefilter CleaningMAINTENANCE OF CELLSWashing Cells and P

Seite 14

93. If the fuse is NOT blown, check the ON/OFF switches andsafety interlock switch for proper engagement andoperation. This can be completed using a v

Kommentare zu diesen Handbüchern

Keine Kommentare

Carrier EACB1614 Bedienerhandbuch

Stöbern Sie online oder laden Sie Bedienerhandbuch nach Luftfilter Carrier EACB1614 herunter. Carrier EACB1614 Instruction manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Luftfilter Carrier EACB1614